Landmann Cronos - Delivery Specifications; Operational Elements

6
12775
Operational elements
Pos. * Designation Function
A Electronic
pulse igniter
Ignites the gas that
flows into the burner
when the flame regula-
tor (B or C) is open.
B Flame regu-
lator for the
grill unit
Feeds gas into the burner
on the grill unit (press,
set to "large flame"
and keep depressed).
After ignition, adjust
the heat input for each
burner side (turn).
C Flame regu-
lator for the
side burner
Feeds gas into the
side burner (press, set
to "large flame" and
keep depressed).
After ignition, adjust
the heat input (turn).
G0 Gas cylinder Fuel container
G1 Cylinder
valve
Cut off safety device;
open gas supply (turn
anti-clockwise) and
close (turn clockwise).
G2 Cylinder
valve thread
Gas cylinder - pressure
regulator connection
G3 Coupling
nut pressure
regulator
Connect the pressure regu-
lator to the gas cylinder
(turn anti-clockwise) and
disconnect (turn clockwise).
G4 Pressure
regulator
Reduce gas pressure
G5 Pressure
regulator
connection
Pressure regulator - gas
hose connection
G6 Hose clip Attach the pressure regula-
tor - gas hose connection
G7 Gas hose Supplies gas to the burner
* see fold-out page
Delivery specifications
Pos. * Qty. Designation
1 1 Warming rack
2 1 Hotplate
3 1 Cooking grill
4 1 Grill unit (pre-assembled)
5 3 Flame tamer
6 2 Angle bracket
7 1 Side burner table with side
burner, gas hose and pressure
regulator (pre-assembled)
8 1 Side burner shelf
9 1 Gas connecting hose
(pre-assembled)
10 2 Side strut
11 1 Rear panel strut
12 1 Front panel strut
13 1 Upright, front right
14 2 Door
15 2 Door handle
16 4 Caster
17 1 Cart base
18 1 Cart panel, right
19 1 Cart panel, left
20 1 Cart panel
21 1 Upright, front left
22 1 Upright, rear left
23 1 Upright, rear right
24 1 Base shelf
25 1 Fat collection tray
26 4 Control knob for adjusting
element (flame regulator).
27 1 Chain (gas cylinder safeguard)
against slipping and falling.
1 Screw card with assembly material
* see fold-out page