To Next Page
S
Sheryl WardAug 4, 2025
What to do if my Landmann Smoker burner does not ignite?
- JJohnny BatesAug 4, 2025
If the burner on your Landmann Smoker fails to ignite, several factors could be responsible. Start by checking if the gas cylinder is empty and replace it if necessary. Ensure that the cylinder valve is open. Inspect the nozzle on the adjusting element (behind the front panel) to make sure it's properly inserted into the burner hose; adjust if needed. Also, verify that the ignition cable is correctly connected to the electronic pulse ignition. Check the distance between the spark plug and the gas outlets on the burner, adjusting if it's incorrect. If the nozzle on the adjusting element is blocked, clean it with a needle. If none of these steps work, the gas system may be blocked and should be cleaned by a specialist.
General
