To Next PageTo Next Page
Need help?Do you have a question about the Lane 59909-059-1X and is the answer not in the manual?
This document provides assembly instructions for a Lane Home Furnishings dual power reclining sofa, identified by item number 59909-059-1X/2X/1MX. The sofa is designed for comfort and convenience, featuring power reclining functionality for ease of use.
The primary function of this device is to provide comfortable seating with the added benefit of power reclining. This allows users to adjust their seating position with minimal effort, enhancing relaxation. The "dual power" designation suggests that multiple reclining mechanisms or features are powered, likely including both the footrest and the backrest. The sofa is composed of several modular parts that are assembled to form a complete unit, indicating a design that might facilitate easier shipping and handling.
While specific technical specifications like motor type, power consumption, or weight capacity are not explicitly detailed in these instructions, the "dual power" feature implies the presence of electric motors for reclining. The system includes a transformer (H) and a plug (G), which are essential for connecting the sofa to a power source. The transformer converts household electricity to the appropriate voltage for the reclining motors. The sofa is designed to accommodate multiple backrests (B, C, D) and wings (E, F), suggesting a multi-seat configuration, likely a three-seater sofa given the three backrests shown. The parts list indicates individual components such as a seat (A), left backrest (B), middle backrest (C), right backrest (D), left wing (E), right wing (F), plug (G), and transformer (H).
The sofa offers user-friendly operation through its power reclining mechanism. To operate, the user connects the power wire from the armrest frame to the transformer (H) and then plugs the transformer into a power source using the plug (G). Once powered, the footrest or backrest can be opened or moved by pressing a power button, which is typically located on the side of the sofa or on a control panel. This eliminates the need for manual levers or pushing, providing a smoother and more effortless reclining experience. The modular design, with separate backrests and wings, suggests that the sofa might offer some degree of customization or easier replacement of individual components if needed. The instructions emphasize that assembly should be performed by two or more people, indicating the size and weight of the components.
The assembly instructions include a crucial maintenance note: "5.WITH USE, SCREW MAY BE COME LOOSE & MUST BE TIGHTENED PERIODICALLY." This highlights a key maintenance requirement for the sofa to ensure its long-term stability and safety. Users are advised to periodically check and tighten any loose screws or bolts. This proactive maintenance helps prevent structural issues and ensures the continued smooth operation of the reclining mechanisms. While not explicitly stated, general cleaning of the upholstery material would also be part of routine maintenance, depending on the fabric type. The instructions also advise against over-tightening screws/bolts until assembly is completed, which is a good practice to prevent stripping threads or damaging components during the initial setup. The inclusion of customer service contact information (Toll Free Phone Number, Email, Website) provides a direct channel for users to seek assistance with any issues, including maintenance or parts replacement.
General| Brand | Lane |
|---|---|
| Model | 59909-059-1X |
| Category | Indoor Furnishing |
| Language | English |
