Need help?Do you have a question about the Laney CD650 and is the answer not in the manual?
General| Brand | Laney |
|---|---|
| Model | CD650 |
| Category | Music Mixer |
| Language | English |
Details the main power input and signal connections on the schematic.
Identifies the pre-amplifier circuitry block within the main schematic.
Identifies the power amplifier circuitry block within the main schematic.
Overview of signal input paths and equalization stages.
Illustrates the signal flow for effects processing and digital signal processing.
Depicts the main and monitor output signal paths and level control.
Shows the generation and distribution of 48V phantom power.
Detailed schematic for the first four input channels, including gain and EQ.
Detailed schematic for input channel 5, including gain and EQ.
Detailed schematic for input channel 6, including gain and EQ.
Common circuitry for equalization, DSP send, and monitoring outputs.
Circuitry for processing tape and auxiliary audio inputs.
Details the circuits for main and monitor volume adjustment.
Circuitry for managing effects send and output signals.
Circuitry for digital signal processing and master output controls.
Steps for initial power-up, bias, and DC offset adjustment.
Detailed procedure for adjusting the bias on channel 1.
Detailed procedure for adjusting the bias on channel 2.
Circuitry for power input, regulation, and protection.
Circuitry for the output amplifier driver stages.
Components and connections for amplifier protection and speaker output.
To Next Page