Need help?Do you have a question about the Laney CONCEPT 6 and is the answer not in the manual?
Crucial safety guidelines including grounding, moisture avoidance, and fuse replacement.
Guide on adjusting input gain using PFL and meters for optimal signal level.
Explains common causes of feedback and methods to prevent or reduce it.
Details XLR mic input, phantom power, and line jack input functionality.
Functionality of the pad for high-level signals and gain for input level adjustment.
Details the graphic equaliser for fine-tuning mixes and room acoustics.
Information on phantom power for condenser mics and its switch.
Measured values for mix noise, mic input EIN, and distortion.
Specifications for gain, bandwidth, and maximum output levels.
Crucial safety guidelines including grounding, moisture avoidance, and fuse replacement.
Guide on adjusting input gain using PFL and meters for optimal signal level.
Explains common causes of feedback and methods to prevent or reduce it.
Details XLR mic input, phantom power, and line jack input functionality.
Functionality of the pad for high-level signals and gain for input level adjustment.
Details the graphic equaliser for fine-tuning mixes and room acoustics.
Information on phantom power for condenser mics and its switch.
Measured values for mix noise, mic input EIN, and distortion.
Specifications for gain, bandwidth, and maximum output levels.
General| Channels | 6 |
|---|---|
| EQ | 3-band |
| Outputs | Main Out (2 x 1/4" TRS), Headphone Out (1/4" TRS), Record Out (RCA) |
| Line Inputs | 4 |
| USB Interface | Yes |
| Inputs | 2 x XLR |
| Effects | Delay |
To Next Page