Need help?Do you have a question about the Laney IRONHEART FOUNDRY Series and is the answer not in the manual?
General| Type | Guitar Amplifier Head |
|---|---|
| Technology | Tube |
| Reverb | Digital Reverb |
| Outputs | 1 x 1/4" External Speaker Output |
| EQ | Bass, Middle, Treble |
| Effects Loop | Yes |
Detailed breakdown of the front panel controls including input, boost, channels, EQ, and reverb.
Connect your guitar via a standard 6.3mm mono jack.
Additional gain stage acting as a boost pedal. LED indicates activity.
Controls gain and volume for Channel 1. Includes Gain Character Switch (CLEAN, ASYM, SYM).
Selects between Channel 1 and Channel 2, controllable via footswitch.
Controls gain and volume for Channel 2, with voicing switch (NEUTRAL, BRIGHT, DARK).
3-band passive EQ (Bass, Middle, Treble) for tonal shaping. Linked controls ensure musicality.
Adjusts the built-in studio quality spring line reverb effect.
Details on the back panel connectivity including DI out, headphone, aux, effects loop, remote, and speaker outputs.
XLR output for audio interface/PA with Ground Link and IR Cab Simulation options.
3.5mm jack for silent practice. Headphone output mirrors DI out's IR emulation.
3.5mm jack for connecting audio playback devices for backing tracks.
6.3mm jacks for sending and returning effects. Transformer isolated for noise-free signal.
6.3mm jack for footswitch control of boost and channel selection.
Connects to passive speaker cabinets (8-16 ohm minimum).
Connection for the universal power supply and main on/off switch.
Connect directly to a passive speaker cabinet using the loudspeaker output.
Integrate effects pedals or units into the DUALTOP's effects loop.
To Next Page