Need help?Do you have a question about the Laney Iommi TI100 and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Output Tubes | 4 x EL34 |
| Effects Loop | Yes |
| Power Output | 100W |
| Channels | 2 |
| Preamp Tubes | 4 x 12AX7 |
| EQ Controls | Bass, Middle, Treble, Presence |
| Footswitch | Yes (Channel Switching) |
| Impedance | 4, 8 & 16 ohms |
| Speaker Outputs | 2 |
| Speaker Configuration | N/A (Head Only) |
Covers risks of electrical shock, fire hazard, and environmental exposure.
Guidance on unpacking, plug checks, and country-specific wiring conventions.
Boost circuit on/off, level control, and indicator LED.
Adjusts preamp distortion level from overdrive to metal.
Socket for power connection and main safety fuse drawer.
Selects between 6L6 or EL34 output tubes to prevent amplifier damage.
Sockets for connecting speaker cabinets; impedance matching is critical.
Details on Side Chain, Insert, and Bypass modes for the effects loop.
Recommended settings for achieving Tony Iommi's signature tones.
Guide on identifying and replacing preamp and output tubes.
To Next Page