Need help?Do you have a question about the Laney LH50 and is the answer not in the manual?
General| Brand | Laney |
|---|---|
| Model | LH50 |
| Category | Musical Instrument Amplifier |
| Language | English |
Covers essential safety guidelines for operation, cleaning, installation, and maintenance to prevent hazards.
Details risks of hearing loss from high sound levels and OSHA permissible exposure limits.
Highlights dangerous voltage warnings and the importance of using correct plugs and grounding.
Provides guidance on initial setup, cable quality, and product handling before first use.
Lists detailed technical parameters including voltage, fuses, power, features, dimensions, and weight.
A welcome message from Lyndon Laney, touching on company heritage and commitment to musicians.
Describes the LH50's 50W Class A/B output, warm tube tones, gain, and suitability for various playing styles.
Details the HI/LO inputs, Gain, Bright, Bass, Middle, Treble, and Volume for the clean channel.
Explains controls for the Drive channel: Channel Switch, Drive, Modern, Bass, Middle, Treble, Drive Vol.
Covers Master Tone, Reverb, Power LED, Standby, and Power switch functions.
Details power inlet, main fuse, HT fuse, and replacement guidance.
Describes serial number, FX Send/Line Out, and FX Return sockets for external connections.
Covers footswitch connection, effects loop bypass/level, and loudspeaker output options.
Provides suggested control settings for achieving clean and crunch tones.
Offers suggested control settings for lead guitar tones, including blues and rock.
Provides blank templates for users to record and save their preferred sound settings.
Offers advice on handling, impedance matching, warming up, cooling down, and general care for tube amps.
Covers common tube issues, symptoms of failure, and step-by-step instructions for tube replacement.
Provides a recommended sequence for powering equipment on and off to prevent damage.
Illustrates the internal signal flow and component connections within the amplifier.
Details the types and grades of tubes used in the amplifier and their locations.
Illustrates connecting the LH50 with single 4 Ohm or 8 Ohm cabinets and an FX controller.
Demonstrates connecting the LH50 with multiple 16 Ohm cabinets and an FX controller.
Provides company contact details and a disclaimer regarding product specification changes.
To Next Page
