P05: Cruise and Non-cruise selection settings
At P05, pressing button by turns, we can see the number "00" or
"01",
"00" is Non-cruise, and "1" is Cruise .The default setting is "00".
P06: Non-zero start and zero start selection settings
At P06, pressing button by turns, we can see the number "00" or
"01", "00" means zero start. "01" means Non-zero start. The default
setting is "00".
P07: Speed limit adjustment in percentage
At P07, pressing button by turns, we can see the number range is
"00"—"99", P07 setting can adjust the scooter's maximum top speed.
"00" means the scooter can reach the maximum speed. The default
setting is "00".(This function needs to be effective when P12 releases
the speed limit)
P08: Automatic shut-off time Settings
This P08 automatic shut-off time range is "00"—"30" minutes,"00"means
no shutdown. Other figures are the timing shutdown time. The default
setting is "05".
P09: Display brightness Settings
This P09 setting can adjust the scooter's screen brightness level. The
P09 range is "1"—"3", "1"means the screen brightnes weakest;
"3" means the strongest, the default setting is "3". And if we want to
change the range "1"—"3" ,we can press by turns.
To Next Page
Loading...
