Lantronix SGX 5150 - Tunnel; Tunnel Statistics; Serial Settings

5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 116
state disable
Disables Failover.
state enable
Enables Failover.
test
Test failover configuration
timeout <seconds>
Sets the Ping response timeout in seconds.
write
Stores the current configuration in permanent memory.
failover (config-wlan-failover:wlan0) level commands
clrscrn
Clears the screen.
default failback threshold
Restores the default Failback threshold.
default failover interface
Restores the default Failover interface.
default failover threshold
Restores the default Failover threshold.
default interval
Restores the default Ping interval.
default method
Restores the default ping method.
default timeout
Restores the default Ping response timeout.
exit
Exit back to interface configuration level
failback threshold
<pings>
Sets the Failback threshold. If <pings> attempts are answered, the device will Failback to
original interface.
failover interface <text>
Sets the Failover interface.
failover threshold
<pings>
Sets the Failover threshold. If <pings> attempts go unanswered, the device will Failover to
selected interface.
hostname <text>
Sets the host name. <text> = name of the host to ping.
interval <seconds>
Sets the Ping interval in seconds.
method icmp
Ping using ICMP-ECHO.
method tcp
Ping using TCP.
no hostname
Clears the host name.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
show status
Show failover status
state disable
Disables Failover.
state enable
Enables Failover.
test
Test failover configuration
timeout <seconds>
Sets the Ping response timeout in seconds.
write
Stores the current configuration in permanent memory.
failover (config-ethernet-failover:eth0) level commands
clrscrn
Clears the screen.
default failback threshold
Restores the default Failback threshold.
default failover interface
Restores the default Failover interface.
default failover threshold
Restores the default Failover threshold.
default interval
Restores the default Ping interval.
default method
Restores the default ping method.
default timeout
Restores the default Ping response timeout.
exit
Exit back to interface configuration level
failback threshold
<pings>
Sets the Failback threshold. If <pings> attempts are answered, the device will Failback to
original interface.
failover interface <text>
Sets the Failover interface.
failover threshold
<pings>
Sets the Failover threshold. If <pings> attempts go unanswered, the device will Failover to
selected interface.