EasyManuals Logo

Lantronix SGX 5150 Command Reference

Lantronix SGX 5150
372 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 171
name <name> <start
port> <target port> <end
port> <protocol> <in-
gress ip> <ip>
add ip address filter <IP
address> <action>
Add a IP Address filter.
add mac address filter
<MAC address> <action>
Add a MAC Address filter.
add route <network>
<gateway> <interface>
<metric>
Add a static route without a name.
add route with name
<name> <network>
<gateway> <interface>
<metric>
Add a static route with a name.
add virtual ip <IP ad-
dress> <lan ip address>
Add a Virtual IP.
add virtual ip with name
<name> <IP address>
<lan ip address>
Add a Virtual IP with name.
clrscrn
Clears the screen.
default default ip address
filter policy
Restores the default value of Default IP Address filter policy (ACCEPT).
default ip address filter
policy accept
Sets the Default IP Address filter policy to ACCEPT.
default ip address filter
policy drop
Sets the Default IP Address filter policy to DROP.
default operating mode
Restores operating mode to the default value (Disabled).
default router ip address
Restores IP address of router to the default value.
default router ipv6 ad-
dress
Clears the IPv6 address of router.
default wan interface
Restores preferred WAN interface to the default value.
delete all ip address fil-
ters
Deletes all ip address filters.
delete all mac address
filters
Deletes all mac address filters.
delete all routes
Deletes all static routes.
delete all rules
Deletes all port forwarding rules.
delete all virtual ip
Deletes all virtual interfaces.
delete ip address filter
<instance>
Deletes an entry from the ip address filters <instance> = index of the entry being removed
delete mac address filter
<instance>
Deletes an entry from the mac address filters <instance> = index of the entry being re-
moved
delete route <instance>
Deletes an entry from the static routes <instance> = index of the entry being removed.
delete rule <instance>
Deletes an entry from the port forwarding rules <instance> = index of the entry being re-
moved.
delete virtual ip <in-
stance>
Delete virtual ip <instance> = index of the ip being removed.
dhcpserver
Enters the dhcpserver level.
exit
Returns to the config level.
firewall disable
Disables firewall on WAN interface.

Other manuals for Lantronix SGX 5150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lantronix SGX 5150 and is the answer not in the manual?

Lantronix SGX 5150 Specifications

General IconGeneral
CertificationFCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicatorsYes
Power requirements9 - 30 VDC
Power over Ethernet (PoE)No
Power consumption (typical)1.9 W
Storage temperature (T-T)-40 - 85 °C
Operating temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)5 - 95 %
Security algorithms802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication methodRADIUS
Ethernet LAN (RJ-45) ports1
Supported protocolsIPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band2.4 / 5 GHz
Cabling technology10/100BASE-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Weight and Dimensions IconWeight and Dimensions
Weight350 g
Dimensions (WxDxH)110 x 89 x 26 mm

Related product manuals