Lantronix SLC 8000 Demo Guide

Lantronix SLC 8000 Virtual Demo Guide
© Lantronix, Inc. 2014. All rights reserved. Lantronix and PremierWave are registered trademarks of Lantronix in the U.S. and other countries. SLC, vSLM, SLP, and Connect Smart.
Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of
their respective owners. Specifications subject to change without notice.
Once on the page, check the box next to “SSH In:”
Then, on “Apply” at the bottom of the page.
If you want the settings to apply to Port 1, as well as ports 2-4, you can select “IP Settings” from the
drop-down to the right of the “Apply” button, and enter “2-4” in the “to Device Ports:” field, then click
on “Apply”.
Next, you will want to enable WebSSH as a Service.

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm