Lantronix xPico Quick Start Guide

xPico™ Wi-Fi® Embedded Device Server Evaluation Kit Quick Start Guide 4
Introduction
Thank you for purchasing the Lantronix® xPico™ Wi-Fi® Embedded Device Server
Evaluation Kit. This Evaluation Kit is designed to provide full access to all the input/output
ports of the xPico Wi-Fi (XPW1001000-01) and xPico (wired Ethernet) (XPC1001000-01)
modules.
This quick start guide describes the procedures for initial connection to the xPico Wi-Fi
device through a network connection.
Once a connection is established you can use the Web Manager for configuration and
control.
Evaluation Kit Contents
The XPW100100K-01 comes with all that a user needs to evaluate the xPico Wi-Fi
Device Server module.
 xPico Evaluation Board with xPico Wi-Fi module (XPW1001000-01)
 2dBi, Whip Antenna with RP SMA connector (930-033-R)
 1.5 to 2.5dBi, PCB Strip Antenna with 50mm U.FL cable (930-099-R)
 5Vdc Wall-mount power supply AC/DC, 1A with mini-USB connector
For the latest revision of this product document, please check our online documentation
at www.lantronix.com/support/documentation
.
Figure 1: Evaluation Kit Contents

Lantronix xPico Specifications

General

Brand	Lantronix
Model	xPico
Category	Microcontrollers
Language	English