Need help?Do you have a question about the Lanzar OPTI 250x2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Signal-to-Noise Ratio | >95dB |
| Low Pass Crossover Frequency | 50Hz - 250Hz |
| Fuse Rating | 30A |
| RMS Power at 4 Ohms | 2 x 125W |
| RMS Power at 2 Ohms | 2 x 250W |
| Bridged RMS Power at 4 Ohms | 1 x 500W |
| Bass Boost | 0dB / +6dB / +12dB |
To Next Page
