Do you have a question about the Lanzar SDN71BT and is the answer not in the manual?
power supply requirement | DC 12V |
---|---|
maximum power output | 4 x 25W (measured at DC 14.4 V) |
video type | 16:9 and 4:3 |
---|---|
video output level | Composite: 1.0 ± 0.2 Vp-p |
load impedance | 75 ohms |
audio output (analog audio) | 2.0 +0-1.0 Vrms |
---|---|
frequency response | 20Hz ~ 20KHz (at 1KHz 0 dB) |
S/N ratio (audio) | ≥90dB (at 1KHz 0 dB) |
FM frequency range | 87.5MHz - 108.0MHz (EU) |
---|---|
FM usable sensitivity | 3uV |
FM I.F frequency | 10.7MHz |
dimensions | 178 x 50.5 x 162 mm |
---|
Warning about the risk of electric shock and instructions not to open the unit.
Caution to reduce fire or electric shock risk by avoiding exposure to rain or moisture.
Essential safety guidelines for installation, usage, and maintenance.
Crucial safety and environmental guidelines to follow before unit operation.
Identification and function of each button on the remote control.
Guide for connecting various cables and wiring harnesses to the unit.
Steps and diagrams for physically installing the unit into a vehicle.
Accessing and configuring system settings like language and video.
Steps to connect a mobile phone to the car audio system.
Making calls, redialing, and accepting or rejecting incoming calls.
Solutions for problems with picture, sound, or both.
Solutions for 'No Disc' or 'Bad Disc' errors.
Troubleshooting issues with the remote control and unit buttons.
Solutions for problems related to radio reception or operation.