www.lasertools.co.uk
Our products are designed to be used correctly and with care for the purpose for which they are intended. No
liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection
cannot be held responsible for any damage to personnel, property or equipment when using the tools. Incorrect
use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been designed to offer
general guidance for a particular tool’s use and while all attention is given to the accuracy of the data no
project should be attempted without referring first to the manufacturer’s technical documentation (workshop
or instruction manual) or the use of a recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter specifications and
components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and
information prior to their use.
To Previous Page
Loading...
Need help?
General
