Laser 5091 Instruction M

Laser 5091 Code Reader User’s Guide Laser 5091 Code Reader User’s Guide
1. One-Year Limited Warranty
Subject to the conditions of this limited warranty, The Tool Connection Limited
(TC) warrants its customer that this product is free of defects in material and
workmanship at the time of its original purchase for a subsequent period of one
(1) year.
In the event this product fails to operate under normal use, during the warranty
period, due to defects in materials and workmanship, TC will, at its sole option,
either repair or replace the product in accordance with the terms and conditions
stipulated herein.
The Tool Connection Limited
Kineton Road
Southam
Warwickshire
CV47 0DR
Tel: (0) 1926 815000
Fax: (0) 1926 815888
2. Safety Information
We provide safety messages to help prevent personal injury and equipment
damage. Below are signal words we used to indicate the hazard level in a
condition.
For your safety, and to prevent damage to the equipment and vehicles, read this
manual thoroughly before operating your code reader. The safety messages
presented below and throughout this user’s manual are reminders to the
operator to exercise extreme care when using this device. Always refer to and
follow safety messages and test procedures provided by the manufacturer of the
vehicle or equipment being tested. Read, understand and follow all safety
messages and instructions in this manual.
2.1 Conventions Used
No. Signal Word Hazard Level
1
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury to the operator or to bystanders.
2
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious
injury to the operator or to bystanders.
3
Indicates a potentially hazardous situation which,
if not avoided, may result in moderate or minor
injury to the operator or to bystanders.
54
CAUTION

Laser 5091 Specifications

General

Brand	Laser
Model	5091
Category	Barcode Reader
Language	English