EasyManua.ls Logo

Laser 5091 User Manual

Laser 5091
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.lasertools.co.uk
5091
Laser 5091
OBDII/EOBD Code Reader
The CAN OBDII/EOBD Code Reader is an innovative and affordable
solution specially designed for the owner to get easy and quick
access to engine problems on all OBDII compliant petrol vehicles
(2001<) and diesel vehicles (2004<) sold worldwide.
Instructions

Other manuals for Laser 5091

Question and Answer IconNeed help?

Do you have a question about the Laser 5091 and is the answer not in the manual?

Laser 5091 Specifications

General IconGeneral
Light Source650nm visible laser diode
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature-20°C to 60°C (-4°F to 140°F)
ConnectivityUSB
Scanning TechnologyLaser
Scan Rate100 scans/second
Resolution4 mil
Scan Depth20-300mm
InterfaceUSB
Power Supply5V DC ±5%
Humidity5% to 95% (non-condensing)

Summary

Laser 5091 OBDII/EOBD Code Reader

Safety Information and Conventions

Safety Message Conventions Used

Explanation of hazard signal words like DANGER, WARNING, CAUTION.

Important Safety Instructions

Critical guidelines for safe operation and to prevent injury or damage.

Device Components and Initial Setup

Powering the Device

Instructions for connecting power via vehicle or USB.

Interface and Core Operations

OBDII/EOBD Diagnostic Services

Overview of the nine diagnostic service modes for OBDII/EOBD.

Reading and Erasing Diagnostic Codes

Reading DTCs (Stored, Pending, Permanent)

Procedures for retrieving diagnostic trouble codes.

Erasing DTCs and Freeze Frame Data

Steps to clear codes and related data after repairs.

Live Data Monitoring

Viewing Complete Live Data Set

Displaying all supported Parameter IDs (PIDs) for real-time data.

Live Data Customization and Recording

Recording Live Data for Analysis

Capturing real-time data for later review of intermittent issues.

Data Recording and Playback

Freeze Frame and I/M Readiness Status

Viewing Freeze Frame Data

Accessing snapshots of vehicle conditions when a DTC occurred.

Reading I/M Readiness Status

Checking the readiness of vehicle emission monitors.

Emissions System Monitoring Tests

On-Board Monitor Tests

On-Board Monitor Tests

Requesting results for non-continuous emission system monitors.

Component Testing and Vehicle Information

System Identification and DTC Lookup

DTC Lookup Functionality

Searching for and displaying definitions of diagnostic trouble codes.

Related product manuals