Laser 5091 Instruction M

Laser 5091 Code Reader User’s Guide Laser 5091 Code Reader User’s Guide
1716
Changing Language
√ The code reader is set to display English menus by default.
To change system language:
1. Use the UP/DOWN key to pick Language from System Setup screen.
2. Press the ENTER key to confi rm.
3. Use the UP/DOWN key to select desired language.
4. Press the ENTER key to save language setting and return.
External Battery
To power on the code reader by vehicle battery
1. Locate the diagnostic interface on vehicle.
2. Plug in the code reader’s OBDII connector to the DLC.
A plastic DLC cover may be found on some vehicles.
Remove the cover before plugging the OBD2 cable.
System Setup
System Setup allows you to:
• Select menu languages.
• Change measurement unit.
• Adjust display contrast.
• Change automatic power-off time.
• Turn on/off beeper.
• Check LCD display and operation of keypad.
√ System Setup settings remain until change to the existing setups are made.
To do system setup:
1. Press the BACK key to enter System Setup from home screen or use
the UP/DOWN key to select System Setup from Main Menu screen.
√ Follow on-screen instructions to program the code reader to meet your
specifi c needs.
NOTE

Laser 5091 Specifications

General

Brand	Laser
Model	5091
Category	Barcode Reader
Language	English