Laser BWT15 - Position Setting for Red Light; Multi-language and Lock Settings

Shenzhen Qilin Laser Application Technology Co., Ltd.
Position Setting for Red Light
1. Adjust the Axis of X and Y motor reflecting lens to change the red light offset
position.
2. The adjustment radius of the laser center point is 5mm.
3. Make sure all motor circruit are normal before adjustment to avoid wrong
operation.
Multi-language and Lock Settings

Muti-language: Chinese-English-Russian-Korean-Vietnamese-Janpanese
 S/N: Serial Number of Machine
 Version: Controller version of system

Available life: Valid use time (when (-) shows mean a permanent use permission)
 License: the License number if needs to be entered when lock or unlock machine