08
1
3
6
5
7
8
9
4
CMM
CMS
CFM
knots
ft/s
ft/m
m/s
km/h
mil/h
MAX
MIN
VEL
FLOW
AREA
DP
WB
x10
2
2
USB
m
ft
1
2
Hold / dew point/wet-bulb temperature
Display lighting / USB transfer
Dew point/wet-bulb temperature
Ambient temperature °C / °F
Measured value factor x10
Function/Application
The anemometer is used to measure air ow rates, volumetric ow rates and
wind speeds. Integrated sensors constantly register the ambient temperature,
relative humidity and calculate the dew point temperature. The USB interface
additionally permits realtime logging on a PC.
Read the operating instructions and the enclosed brochure „Guarantee
and additional notices“ completely. Follow the instructions they
contain. This document must be kept in a safe place and passed on
together with the device.
!
GB