11
CompactCross-Laser Pro
Function / Application
Automatic cross line laser with green laser technology for aligning tiles,
wall studding, windows, doors etc.
– The slope-mode feature is an extra that permits gradients to be laid out.
– GRX-ready: integrated hand-held receiver mode
– Bluetooth
®
interface for remote control of the device
– Automatic levelling range 4°, Accuracy 0,35 mm / m
Completely read through the operating instructions, the "Warranty and
Additional Information" booklet as well as the latest information under
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and passed
on together with the device.
!
General safety instructions
– The device must only be used in accordance with its intendedpurpose and
within the scope of the specications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modications or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or signicant vibration.
– The device must no longer be used if one or more of its functions fail or
the battery charge is weak.
– Please ensure compliance with the safety regulations set out by local and
national authorities with regard to the correct and proper use of the device.
Laser radiation!
Do not stare into the beam!
Class 2 laser · < 1 mW · 515 nm
EN 60825-1:2014
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reected beam.
– Do not point the laser beam towards persons.
EN
To Next Page
Loading...
Need help?
General
