LaserLiner LaserCube - General Safety Instructions; Inserting Batteries

04
1
–
3
1
4
2
GB
Read the operating instructions and the enclosed brochure
„Guarantee and additional notices“ completely. Follow the
instructions they contain. This document must be kept in a
safe place and if the laser device is passed on, this document
must be passed on with it.
!
Line laser for alignment work on the ground
and on walls.
General safety instructions
– Attention: Do not look into the direct or reected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person‘s eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the beam.
– Do not expose the device to mechanical stress, extreme tempera-
tures, moisture or signicant vibration.
– The device must only be used in accordance with its intended
purpose and within the scope of the specications. Modications
or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specications.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2014
Inserting batteries
Open the battery compartment
and insert batteries according
to the symbols. Be sure to pay
attention to polarity.
Laser output windows
Battery compartment
(bottom)
ON / OFF switch
Vials
1
2
3
4