06
1 3 4
C / AAAAA D
5 62
3a 3b
1b
1a
2b
2a
4
5
GB
Read the operating instructions and the enclosed brochure
„Guarantee and additional notices“ completely. Follow the
instructions they contain. Safely keep these documents for
future reference.
!
Function / Application
The PowerCheck tester is used to check all commonly used batteries
as well as high-performance rechargeable batteries (NiMH). The
battery condition is shown on an easy-to-read, 3-colour LCD scale.
Pull-out battery holder:
Round cells:
1.5V battery:
Alkaline manganese /
Zinc carbon
1.2V rechargeable battery:
NiMH
Button cells: (large)
3.0V battery:
Lithium manganese
Negative pole, battery holder
Positive pole, battery holder
Pull-out battery holder:
Button cells: (small)
1.5V battery:
Alkaline manganese
3.0V battery:
Lithium manganese
Negative pole, battery holder
Positive pole, battery holder
Battery holder:
Flat cells:
9.0V battery:
Alkaline manganese /
Zinc carbon
8.4V rechargeable battery:
NiMH
Negative pole, battery holder
Positive pole, battery holder
Battery type setting
3-colour LCD scale
green: good
orange: weak
red: replace
1
1a
1b
2
2a
2b
3
3a
3b
4
5
To Next Page
Loading...
Need help?
General
