SmartCross-Laser
09
3
LASER LASER LASER LASER
GB
Slope mode
Do not release the transport restraint, set the ON/OFF switch
to „OFF“. Select and switch on the laser with the selection
button. Sloping planes can now be measured. This mode
cannot be used to perform horizontal or vertical levelling
as the laser lines are no longer aligned automatically. The
LED lights constantly red.
Technical data
Accuracy ± 0.5 mm / m
Operating range (depending
on room illumination)
10 m
Laser wavelength 650 nm
Laser class / line laser output
power
2 / < 1 mW
Power supply
2 x 1.5V alkaline batteries
(type AA, LR6)
Operating time 15 hours (alkaline batteries)
Operating temperature 0 °C ... +40 °C
Storage temperature -10 °C ... +70 °C
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical
and electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
Subject to technical alterations. 07.15
To Next Page
Loading...
Need help?
General
