SuperLine 2D
07
Line laser for aligning work on all surfaces
– Exact alignment of horizontal/vertical surfaces and slopes
– 360° rotatable angle scale allows device to be tilted at any
angle
– Suitable for use on oors and walls
– Safe attachment with special pins without damaging surfaces
such as nishing coats, carpets, wood, veneered surfaces etc.
– Alternative: attachment with optional Laserliner ConTacts
adhesive stripes
– Strong magnetic clamps for attaching to metal surfaces
– Easy-to-read, illuminated spirit-level
– Attention: Do not look into the direct or reected beam.
– Do not point the laser beam towards persons.
– If a person‘s eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used to look
at the laser beam or reections.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014/AC:2017
Safety instructions
Using class 2 lasers
General safety instructions
– Attention: Do not look directly into the laser beam!
– The laser may not get into the hands of children!
– Do not point this device unnecessarily toward persons.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or signicant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
Completely read through the operating instructions,
the „Warranty and Additional Information“ booklet as
well as the latest information under the internet link
at the end of these instructions. Follow the instructions
they contain.This document must be kept in a safe place
and if the laser device is passed on, this document must
be passed on with it.
!
EN
To Next Page
Loading...
Need help?
General
