Lasertec TruPulse L2 - Page 10

Measure Distance
In the Slope Distance Mode , the TruPulse L2 will automatically
calculate and .
Measurements are from the 1/4-20 tripod mount (center) of the laser
to the target.
[
1
]
Press the Up or Down button until screen is displayed.
[
2
]
Aim at the target where you have a clear line of sight then press-and-hold the
re button .
[
2.1
]
The laser indicator will be displayed until measurement is acquired or
re button is released.
Displayed result will “ash” indicating measurement acquired.