How to fix Lasertec HV2G Measuring Instruments when the laser does not turn on?
If your Lasertec Measuring Instruments laser doesn't turn on, first, check the batteries to ensure they are correctly inserted or need replacing. Next, inspect the battery compartment for damage, ensuring the contacts are clean and not bent. Finally, connect the mains power adapter.
What to do if Lasertec HV2G Measuring Instruments laser turns on but does not rotate?
If the Lasertec Measuring Instruments laser turns on but doesn't rotate, begin by checking the batteries and ensuring they are correctly inserted. Then, inspect the battery compartment for any signs of damage, making sure the contacts are clean and not bent. Also, the instrument may be outside its self-leveling range. Try adjusting the instrument or tripod to ensure it is level.
Why Lasertec HV2G laser does not level off?
If your Lasertec Measuring Instruments laser does not level off, the instrument may be outside its self-leveling range. Adjust the instrument or tripod so it is level.
Why Lasertec HV2G laser does not remain on for long periods of use?
If your Lasertec Measuring Instruments laser does not remain on for long periods of use, it might be due to low power. Check the batteries. Alternatively, the instrument may have impact damage. Inspect the battery compartment for signs of damage, ensuring they are clean and not bent.
What to do if Lasertec HV2G Measuring Instruments detector speaker is not functioning?
If the detector speaker on your Lasertec Measuring Instruments is not functioning, ensure that the sound is turned on.
General| Brand | Lasertec |
|---|---|
| Model | HV2G |
| Category | Measuring Instruments |
| Language | English |
To Next Page
