24
▪ Reflective surfaces such as glass may reflect
the beam, causing two beams to strike the
detector at the same time. This may create
inaccurate reference points.
▪ This is a precision measuring instrument
and should always be handled with care and
transported within the carry case provided.
▪ Whenever possible, store the instrument
in a dry, shady location.
▪ Calibration of the instrument is recommended:
every six months, if ongoing accurate levelling
is required, or an impact has occurred.
▪ The operator should check the accuracy
of the instrument before precision levelling
is attempted. Failure to do so may result in
inaccurate measurements.
▪ The supplied charger is specific to this
product. Do not purchase or use any other
type of charger or power adaptor.
▪ Clean the instrument with a dry, soft cloth
after use in dusty, damp or wet conditions
before storing.
▪ Smudges and fingerprints may be
removed with a damp tissue or a soft, lint-
free cloth.
CARE AND MAINTENANCE
To Next Page
Loading...
Need help?
General
