Measure Height in 2-Shots
This measurement routine is ideal for leaning objects and requires a
clear line of sight for both shots.
[
1
]
Press Up or Down buttons until is displayed.
[
2
]
Aim where you have a clear line of sight to the target and press-and-hold
re button .
[
2.1
]
The laser indicator will be displayed. When the measurement is
acquired
will be displayed. Note this value for the Vertical Distance
(VDb) measurement.
[
3
] Aim where you have a clear line of sight at the top of the target then press-
and-hold
the re button .
To Next Page
Loading...
