Lattice ECP5 User Manual

QuickART
ECP5 Evaluation Board
This document provides a brief introduction to ECP5 Evaluation Board.
1
2
Check Kit Contents
The ECP5 Evaluation Board kit contains the following items
 ECP5 Evaluation Board
 12V AC/DC Adapter & International Plug Adapters
 USB Cable for Programming via PC (USB-A to Mini-B)
 Limited license with unique serial number for Lattice Diamond development software
(optional to use).
 Quick Start Guide
Using the ECP5 Evaluation Board
The ECP5 Evaluation Board as shipped supports Master-SPI based conguration.
The external SPI Flash Conguration Memory is pre-loaded with a demonstration
program described below.
Mini USB
Programming
(J2)
JTAG
Interface (J1)
ECP5-5G
Device (U3)
GPIO
Headers
(J5, J8)
Prototype
Area
Microphone
Board/
GPIO Header
(J30)
PMOD/
GPIO
Header
(J31)
GPIO
Headers
(J32, J33)
12 V DC
Power
Input (J37)
Input Push
Buttons
(SW2, SW3,
SW4)
Output LEDs
(D5-D12)
CFG Switches
(SW1)
Input Switches
(SW5)
SPI Flash
Conguration
Memory (U4)
Versa
Expansion
Connectors
(J39, J40)
Parallel
Cong
Header
(J38)
SERDES Test
SMA
Connectors
(J9-J26)

Lattice ECP5 Specifications

General

Brand	Lattice
Model	ECP5
Category	Motherboard
Language	English

Summary

ECP5 Evaluation Board Quick Start

Check Kit Contents

Lists the items included in the ECP5 Evaluation Board kit, such as the board, power adapter, USB cable, and software license.

Using the ECP5 Evaluation Board

Explains the initial configuration of the ECP5 Evaluation Board using Master-SPI and a pre-loaded demonstration program.

Installing the Software

Guides users on downloading and installing the Lattice Diamond design software for developing custom solutions.

Powering the Board & Observing the Demo Program

Details how to connect power and observe the board's initial demonstration program via LEDs.

Doing More with the ECP5 Evaluation Board

Directs users to the Lattice website for additional resources, the full User's Guide, and demo source code.