ASCII BIDIRECTIONAL PROTOCOL .................................................................................... 23
1. SETPOINT PROGRAMMING .......................................................................................... 23
1.1. SETTING SETPOINT VALUES CURRENTLY IN USE ......................................................... 23
1.2. SETPOINT STORAGE IN EEPROM MEMORY .................................................................... 23
2. READING WEIGHT, SETPOINT AND PEAK (IF PRESENT) FROM PC ....................... 24
3. SEMI-AUTOMATIC ZERO (WEIGHT ZERO-SETTING FOR SMALL VARIATIONS ..... 24
4. COMMUTATION OF GROSS WEIGHT TO NET WEIGHT ............................................. 25
5. COMMUTATION OF NET WEIGHT TO GROSS WEIGHT ............................................. 25
6. READING OF DECIMALS AND DIVISION NUMBER .................................................... 25
7. TARE ZERO-SETTING .................................................................................................... 25
8. REAL CALIBRATION (WITH SAMPLE WEIGHT) ......................................................... 26
9. KEYPAD LOCK (BLOCK THE ACCESS TO THE INSTRUMENT) ................................ 27
10. KEYPAD UNLOCK .......................................................................................................... 27
11. DISPLAY AND KEYPAD LOCK ...................................................................................... 27
12. CHECK-SUM CALCULATION ........................................................................................ 27
MODBUS-RTU PROTOCOL .................................................................................................. 28
FUNCTIONS SUPPORTED IN MODBUS ................................................................................ 28
COMMUNICATION ERROR MANAGEMENT ......................................................................... 29
LIST OF AVAILABLE REGISTERS ......................................................................................... 30
REAL CALIBRATION (WITH SAMPLE WEIGHTS) ................................................................ 31
ANALOG OUTPUT SETTING .................................................................................................. 31
INPUTS AND OUTPUTS REGISTERS .................................................................................... 32
DIVISION AND UNITS OF MEASURE REGISTER (40014) .................................................... 33
COMMAND REGISTER (40006) .............................................................................................. 34
COMMUNICATION EXAMPLES .............................................................................................. 35
RESERVED FOR THE INSTALLER ...................................................................................... 37
MENU LOCKING ...................................................................................................................... 37
MENU UNLOCKING ................................................................................................................. 37
TEMPORARY MENU UNLOCKING ......................................................................................... 37
DATA DELETION AND PROGRAM SELECTION ................................................................... 37
KEYPAD OR DISPLAY LOCKING .......................................................................................... 38
DECLARATION OF CONFORMITY - EU ............................................................................... 39
To Next Page
