Launch VALUE-500 User Manual

NOTE:
 Carefully read the user manual before using, and keep it well for future reference.
 Carefully check the device parts list before using.For any doubt, contact Launch distributor
immediately.
 Due to the product upgrade, tiny difference between the user manual and the device will not be
further noticed. Take the device as standard.
Copyright reserved! Without written agreement from Launch Tech Co., Ltd (Hereinafter refer to "Launch"),
any company or person is not allowed to copy and duplicate this user manual in any format (electronic,
mechanical, video, record or other formats).The user manual is designed only for Launch products. Any
consequence caused by using the user manual to guide other device operation is not under the
responsibility of Launch.
Launch and its branches are not responsible for the fees and expense of the device damage and loss due
to private accident or from third party, misuse and abuse of the device, unauthorized change and repair,
or any operation and maintenance not following Launch standard.
Launch is not responsible for device damage or problem due to the usage of any optional parts or
consumables instead of Launch original products or Launch recognized products.
Declaration: Other product names mentioned in the user manual are aimed to describe the device usage.
The registered trademarks still belong to the original company.
The device is for professional technicians or maintenance and repair personnel.
Registered Trademark
Launch has registered its trademark in China and several other countries, logo is .Other Launch
trademarks, service marks, dot names, Icons, company names mentioned in the user manual all belong
to Launch and its subsidiaries.In those countries where Launch trademark, service mark, dot name, icon,
company name not registered yet, Launch declaim the right for its unregistered trademark, service mark,
dot name, icon, and company name.Trademarks of the other products and company names mentioned in
the user manual still belong to original registered company.Without written agreement from the owner, no
person is allowed to use the trademark, service mark, dot name, icon and company name of Launch or of
other mentioned companies.You can visit http://www.cnlaunch.com or write to Customer Service Center
of LAUNCH TECH CO., LTD at Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Longgang
District, Shenzhen, P.R.China, to get contact with Launch for the written agreement on the usage of the
User Manual.

Launch VALUE-500 Specifications

General

Brand	Launch
Model	VALUE-500
Category	Service Equipment
Language	English

Summary

Registered Trademark

Safety Precaution

Equipment Introduction

Functions

Describes the main capabilities of the unit, such as recovery and charging.

Technical Parameters

Lists key specifications like power, temperature, and operating rates.

Appearance Introduction

Outside View

Illustrates the front view of the unit and its main display.

Rear View

Details external components and ports located on the back.

Side View

Shows external features and connection points on the sides.

Operation Panel

Explains the controls, gauges, and touchscreen interface.

Internal Structure

Provides a visual overview of the unit's internal components.

Device Connection to Car

High and Low Pressure Valves Operating Guideline

Turn off the high and low pressure valves

Instructions for correctly closing the AC system's service valves.

Turn on the high and low pressure valves

Instructions for correctly opening the AC system's service valves.

Operation Procedures

Refrigerant Cylinder Refill

Steps for refilling the refrigerant into the unit's internal tank before use.

Recycle

Process for recovering refrigerant from the vehicle and storing it.

Vacuum

Procedure to evacuate air and moisture from the AC system.

Charge

Steps for accurately charging refrigerant into the vehicle's AC system.

Purge

Method for cleaning the vehicle's refrigerant lines and components.

Quick Maintenance

Steps for performing rapid cleaning and refilling operations for maintenance.

Equipment Maintenance

Electronic Scale Calibration

Guide to calibrating the unit's electronic scale for accurate measurements.

Electronic Scale Reset

Instructions for resetting the electronic scale to its default state.

Equipment Information

Displays hardware, software, and operational data of the unit.

Filter Parameter

Procedures for resetting the filter service time after replacement.

Customer Service Center