SOLUTIONS TO THE MOST COMMON PROBLEMS
EN
Problem Possible causes Solution
The machine does not turn on.
» The machine is not connected to
the electric power supply.
» Check to see that it is plugged in.
The machine produces water rather
than coffee.
» The capsule has not been put in. » Insert a new capsule.
The machine takes a long time to
heat up.
» The machine has a lot of calcium
deposits.
» Decalcify the machine.
The pump is very noisy.
» There is no water in the tank. » Fill up with fresh drinking water.
The machine will not supply the
product and the button will blink.
» There is no water in the tank. » Fill up with fresh drinking water.
The capsule loader lever will not
close.
» Used capsule drawer is full.
» Capsule not inserted properly.
» Empty the used capsule drawer.
» Raise the capsule loader lever and
insert the capsule correctly.
The coffee gushes out too quickly
and the espresso cream does not
form.
» The capsule has already been
used.
» Insert a new capsule.
The supply button is ON with red
steady light.
» Water heating system damaged. » Bring the machine to an author-
ized service centre.
• Voltage: 220-240V 50/60 Hz
• Total wattage: 1200 W
• Power absorption (stand-by mode): 0,5 W
• Tank capacity: 0,75 l
• Dimensions: H 265 mm L 150 mm P 338 mm
H 10,4 in L 5,9 in P 13,3 in
2006/42 CE - 2004/108 CE - 2006/95 CE
TECHNICAL FEATURES
• Weight: 4 kg / 8,8 lb
• Collector drawer:
10
capsules
• Material used in the body
(accessible parts generally): ABS
To Next Page
Loading...
