To Next PageTo Next PageHow to fix a LAVAZZA LB 1200 GALACTICA Coffee Maker that does not turn on?
If your LAVAZZA Coffee Maker doesn't turn on, the most likely cause is that it's not properly connected to the power supply. Ensure that the plugs are correctly inserted into the mains power socket.
What to do if the capsule-loading lever will not close properly on my LAVAZZA LB 1200 GALACTICA?
If the capsule-loading lever on your LAVAZZA Coffee Maker won't close properly, it could be due to a full used capsule or drip tray. Empty the used capsule or drip tray. Alternatively, the capsule might be inserted incorrectly. Raise the capsule-loading lever and insert the capsule correctly.
How to make my LAVAZZA Coffee Maker espresso hotter?
If the espresso from your LAVAZZA Coffee Maker isn't hot enough, the cups may be cold. Preheat the cups by filling them with warm water.
Why is my LAVAZZA Coffee Maker not brewing espresso?
If your LAVAZZA Coffee Maker is not brewing espresso, several issues could be the cause: * A capsule might not be inserted. Ensure you insert a capsule. * The operating temperature may not have been reached. Wait until the correct temperature is reached. * The capsule-loading lever might be raised. Lower the capsule-loading lever. * There might be no water in the tank. Top up with fresh drinking water and repeat loading of the hydraulic circuit. * The filter might not be inserted correctly. Check the insertion of the Brita® filter and repeat loading of the hydraulic circuit.
Why is the pump not starting on my LAVAZZA LB 1200 GALACTICA Coffee Maker?
If the pump on your LAVAZZA Coffee Maker isn't starting, the water tank may be empty. Top up the tank with fresh, drinking water and repeat the hydraulic circuit washing operation.
Why is no steam dispensed from the mixer of my LAVAZZA Coffee Maker?
If no steam is coming from the mixer of your LAVAZZA Coffee Maker, it could be due to several reasons: * The milk frother tube might be obstructed. Carry out automatic cleaning of the mixer. * There might be no water in the tank. Top up with fresh drinking water and repeat loading of the hydraulic circuit. * The filter might not be inserted correctly. Check the insertion of the Brita® filter and repeat loading of the hydraulic circuit.
Why is my LAVAZZA LB 1200 GALACTICA Coffee Maker not producing latte or cappuccino froth?
If your LAVAZZA Coffee Maker is not producing latte or cappuccino froth, it could be because the milk is not cold enough. Use milk at refrigerator temperature. Another cause could be that the milk frother tube is obstructed. Carry out automatic cleaning of the mixer; if necessary, extract the milk frother rod, check whether it is damaged and perform cleaning manually.
Why is latte or cappuccino froth not produced by my LAVAZZA LB 1200 GALACTICA?
If your LAVAZZA Coffee Maker is not producing latte or cappuccino froth, the milk frother may not be rotating. Try carrying out automatic cleaning of the mixer; if necessary, extract the milk frother rod, check whether it is damaged and perform cleaning manually.
Why does espresso spurt out too quickly from my LAVAZZA LB 1200 GALACTICA Coffee Maker?
If the espresso spurts out too quickly and cream does not form in espresso drinks with your LAVAZZA Coffee Maker, a used capsule may have been inserted. Try inserting a new capsule.
General| Brand | LAVAZZA |
|---|---|
| Model | LB 1200 GALACTICA |
| Category | Coffee Maker |
| Language | English |
Instructions for initial setup, including power connection and water tank filling.
Step-by-step guide to brewing an espresso manually without preset dosage.
Procedure for customizing and saving espresso dose quantities.
Instructions for brewing espresso using pre-programmed dosage settings.
Detailed steps for preparing an 8oz or 12oz cappuccino using the machine.
Instructions for preparing a Latte Macchiato, similar to cappuccino preparation.
Steps for performing an automatic cleaning cycle of the espresso brewing unit.
Instructions regarding safe connection to mains power and handling of the power cord.
Warnings about preventing contact with electrical parts and water.
