LAVAZZA CLASSY Pro LB 1200 USA

Questions and Answers

Z
zcraigAug 5, 2025
Why is my LAVAZZA Coffee Maker leaking water from the front?
- K
  Karen MullinsAug 5, 2025
  If water is leaking from the front of your LAVAZZA Coffee Maker, there could be several reasons. First, ensure that the spent capsule drawer is correctly inserted. Next, check if the spent capsule drawer is full and empty it along with the drip tray if needed. A stuck capsule could also be the cause; try lifting and lowering the capsule loading lever. If the problem persists, disconnect the machine from the power and manually remove the capsule from the duct. Lastly, make sure you are using Lavazza capsules or compatible ones.
K
Kelsey HayesAug 9, 2025
How to fix a LAVAZZA CLASSY Pro LB 1200 USA Coffee Maker that won't turn on?
- L
  Louis PowellAug 9, 2025
  If your LAVAZZA Coffee Maker does not turn on and the power lights are off after pressing the MULTIFUNCTION button, check the following: Ensure the machine is properly connected to the power source. Avoid using a faulty power strip by connecting the machine directly to the power source. Verify that the power supply is working by connecting another device to the same outlet.
L
lovechristineAug 15, 2025
Why is my LAVAZZA CLASSY Pro LB 1200 USA Coffee Maker leaking water from the back?
- M
  Matthew HuffAug 15, 2025
  If water is leaking from the rear of your LAVAZZA Coffee Maker, make sure the tank is correctly inserted. Also, inspect the tank for any damage by keeping it separate from the machine and checking for leaks.
S
scochranAug 20, 2025
Why does my LAVAZZA Coffee Maker take so long to heat up?
- M
  Michele PierceAug 20, 2025
  If your LAVAZZA Coffee Maker is taking a long time to heat up, it could be due to a couple of reasons. If the machine has been stored in a cold environment, store the coffee machine in a proper environment and run 2 supplies without capsules. Alternatively, the machine may have limescale build-up, so descale the machine.
J
Jill CamposAug 25, 2025
What to do if my LAVAZZA CLASSY Pro LB 1200 USA Coffee Maker displays 'SYSTEM TOO HOT'?
- S
  sergiowestAug 26, 2025
  If your LAVAZZA Coffee Maker displays the message “SYSTEM TOO HOT,” it indicates that the machine has overheated internally. To resolve this, wait approximately 15 minutes for the machine to cool down. Once cooled, press the MULTIFUNCTION button to restart the system.
C
chadperezAug 29, 2025
What to do if the loading lever on my LAVAZZA CLASSY Pro LB 1200 USA is hard to move?
- Y
  yvaldezAug 30, 2025
  If the loading lever on your LAVAZZA Coffee Maker doesn't reach the supply position or requires too much effort to close, the spent capsule drawer may be full. Empty the spent capsule drawer. If that doesn't work, the capsule may be fitted incorrectly. Repeat the sequence: lever in the off position, then lever in the brewing position. If this is still not enough, disconnect the machine from power and manually remove the capsule from the duct.