Open the lid and pour the frothed milk into the
cup.
Make sure that the crown stays in the container
while the milk is being poured into the cup.
Ensure the appliance is disconnected from the
power outlet and that it has cooled down before
cleaning. For more detailed information, refer to
“MAINTENANCE AND CLEANING”.
TEMPORARY OR FINAL INTERRUP-
TION OF THE CYCLE
If you want to stop the milk heating cycle, press the
multifunction button again.
To reactivate the heating cycle or froth the milk,
press the multifunction button again.
If the milk is sufficiently hot at the moment of the
interruption of the process, the appliance will not
be able to be restarted.
FROTHING COLD MILK
It is possible to froth milk without having to heat it
up. Proceed as shown in points to in section
“HEAT AND FROTH MILK”.
Press and hold the multifunction button for at least
3 seconds.
The appliance emits a long sound.
The multifunction button turns on with a quick
white flashing light.
The appliance turns on and starts to froth the milk.
After a minute the frothing process ends automat-
ically.
The appliance emits a double beep to indicate the
end of the frothing cycle.
The multifunction button turns off.
Open the lid and pour the frothed milk into the
cup.
Make sure that the crown stays in the container
while the milk is being poured into the cup.
USE OF THE MILK FROTHER
To Next Page
Loading...
