INSTRUCTION MANUAL 4
5. SERVICE
a. Have your floor machine serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the floor machine is maintained.
b. If the replacement of the power cord is necessary, this has to be done by the manufacturer
or a designated service organization.
SPECIFIC SAFETY RULES
• For your safety, do not plug in your floor machine or try to use it until it is completely
assembled according to these instructions, and until you have completely read and
understood this user manual.
• Always keep hands out of the path of floor machine. Avoid awkward hand positions where
a sudden slip could cause your hand to move into the floor machine.
• Make sure there are no nails or foreign objects in the area that is being cleaned.
• Protect your eyes. Always wear safety goggles while machine is in use to avoid potential
eye damage.
• Everyday glasses have only impact resistant lenses and ARE NOT safety glasses. For your
own protection, make sure your safety glasses or goggles comply with the ANSI Z87.1
Safety Standard.
• Never use this floor machine without the provided GFCI.
• Always verify that the GFCI is working correctly before starting work.
• Replacement of the plug or the power cord shall always be carried out by the manufacturer
or a designated service organization.
• Keep liquid clear of the parts of the machine and away from persons in the working area.
To Next Page
Loading...