25
CHAPTER 1 - GENERAL INFORMATIONS
ATTENTION: READ THIS INSTRUCTIONS MANUAL CAREFULLY BEFORE USING THE
MACHINE
THE MANUFACTURER DISCLAIMS ALL LIABILITY FOR DAMAGE TO THINGS AND / OR INJURY TO
PERSONS RESULTING FROM FAILURE TO COMPLY WITH THE INSTRUCTIONS IN THIS MANUAL AND
FROM INCORRECT AND / OR IMPROPER MACHINE USE.
ALL THE EQUIPMENT NEEDED FOR PERSONAL PROTECTION (GLOVES, MASKS, WHITE-LENS
GLASSES, KEYS, TOOLS, ETC.) MUST BE PROVIDED BY THE USER.
FOR EASIER READING, REFER TO THE INDEX PAGE.
ALWAYS KEEP THIS MANUAL HANDY FOR QUICK REFERENCE (IN CASE OF LOSS, ASK YOUR DEALER
FOR ANOTHER COPY)
THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES OR UPGRADE ITS MACHINES,
WITHOUT ANY OBLIGATION TO UPGRADE PREVIOUSLY- SOLD MACHINES.
ALL SWEEPERS CONFORM TO EEC STANDARDS AND ARE LABELLED:
CHAPTER 2 - PURPOSES / INTENDED USE
The manufacturer is pleased to count you among the many owners of SWL R1000 ET/SW R 6200 BT – SWL
R1000 ST/SW R 8300 SC series.
By keeping to the following instructions, we feel sure you will fully appreciate its’ work options.
• This instruction manual is provided to notify and de ne as clearly as possible the purposes and intended
use which the machine was built and to enable you to use it in total safety. It also contains a list of minor
operations for keeping the machine in good and safe working order. These operations can be easily
performed by anyone.
• For extraordinary maintenance jobs, always employ skilled personnel.
• The manual also contains details of hazards and outstanding risks, i.e., all those risks that cannot be
eliminated, with speci c instructions for each single case. You will also nd details of acceptable and
unacceptable machine use, how to run the machine, technical details and performance limits, how to
use and service the machine, details concerning decommissioning, dismantling and demolition.
CHAPTER 3 - PREPARATION (UNPACKING)
After removing the outer packaging, remove the machine from the pallet; this operation can be done in two
ways:
A) Take a hook and 4 tie-rods of suitable lifting capacity for the weight of the machine (shown on the CE
To Next Page
Loading...
Need help?
General
