LawnMaster BL705 - Assembly; Assembling the Blower Tube

See Figure 3-4.
You may use this product for the purposes listed below:
 Clearing leaves and other yard debris from your lawn
 Keeping decks, patios, garages and driveways free from leaves, pine needles and other debris
 Attach the outlet end of an extension cord to the plug on the rear of the blower.
NOTE: Use only an approved outdoor extension cord as described previously in this manual.
 Route the extension cord through the side of the loop located on the rear of the blower housing
and place underneath the cord retainer.
 To start the blower, place the power switch in the ON position.
 To stop the blower, place the power switch in the OFF position.
APPLICATIONS
STARTING/STOPPING THE BLOWER
A - Cord retainer
B - Loop
C - Plug
D - Extension cord
C
D
B
A
ON
OFF
Fig. 3 Fig. 4
OPERATION
12