LawnMaster BV1210E 1201 User Manual

LawnMaster BV1210E 1201

24 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Operator's Manual

CAUTION:

To reduce the risk of injury, the user must read and understand the operator's manual

before using this product.

VARIABLE SPEED - 12 AMP ELECTRIC BLOWER / VACUUM

BV1210E 1201

EN p. 2

Table of Contents

Questions and Answers:

N
Nicole MortonJul 28, 2025
Why LawnMaster Blower won't start?
- J
  jenniferhoodJul 29, 2025
  If your LawnMaster Blower isn't starting, several factors could be the cause. First, ensure the unit is properly plugged into an electrical outlet. Check that the power/speed switch isn't in the OFF position; slide it to high or low. Also, make sure the vac tubes are correctly installed, allowing the switch to engage, and that the vacuum gate/port is fully closed and locked. The housing circuit might have tripped, so check your wall circuit breaker panel and reset it if necessary. Finally, the motor may be overheated; turn the tool off and wait several minutes for it to cool down.
P
peter43Aug 11, 2025
What to do if LawnMaster BV1210E 1201 won't blow or suck debris?
- E
  Erin RossAug 11, 2025
  If your LawnMaster Blower isn't blowing or sucking debris, there are several potential causes. First, check if the bag is full and empty it if necessary. A blocked tube or impeller could also be the problem; clear any blockages. Inspect the bag for tears and replace it if needed, and ensure the bag is zipped up. Also, make sure the unit is plugged into an outlet or extension cord. Finally, the motor may be overheated; in this case, turn the tool off and wait several minutes for it to cool down.

LawnMaster BV1210E 1201 Specifications

General

Brand	LawnMaster
Model	BV1210E 1201
Category	Blower
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

SYMBOLS

KNOW YOUR ELECTRIC BLOWER

FEATURES

ELECTRICAL INFORMATION

DOUBLE INSULATION

Concept in safety for electric power tools, eliminates need for grounded cords. Exposed metal parts are isolated.

ELECTRICAL CONNECTION

Product uses a 120V, AC only, 60 Hz power supply. Do not operate on DC.

GFCI

Ground Fault Circuit Interrupter protection should be provided on the circuit or outlet.

GUIDELINES FOR USING EXTENSION CORDS

Use the proper extension cord, heavy enough to carry current, and in good condition.

ASSEMBLY

UNPACKING

Carefully remove product and accessories, check packing list, inspect for damage.

ASSEMBLING THE BLOWER TUBE

Slide blower tube forward, insert concentrator nozzle to lock.

INSTALLING VACUUM TUBE AND COLLECTION BAG WITH SHOULDER STRAP

Open gate, attach roller wheels, align and insert vacuum tubes, attach collection bag, adjust strap.

OPERATION

APPLICATIONS

Use for clearing leaves and yard debris, keeping decks, patios, garages, driveways clean.

STARTING / STOPPING THE BLOWER/VAC

Attach extension cord, route it, turn power switch to ON to start, OFF to stop.

OPERATING THE BLOWER/VAC

Blow edges of debris piles, use rakes/brooms, watch for people/pets/cars, hold device correctly, operate at reasonable hours.

EMPTYING OF COLLECTION BAG

Switch off, disconnect plug, wait for fan to stop, open bag and empty.

CARE AND MAINTENANCE

GENERAL MAINTENANCE

Avoid solvents on plastic parts, use clean cloths for dirt, dust, oil, grease.

STORAGE (1 MONTH OR LONGER)

Clean foreign materials, store indoors away from children and corrosive agents.

TROUBLESHOOTING

LAWNMASTER® WARRANTY

EXPLODED VIEW

PARTS LIST

Related product manuals

Preview: LawnMaster BL805E 1201

LawnMaster BL805E 1201

Preview: LawnMaster BL705

LawnMaster BL705

Preview: LawnMaster BL805E

LawnMaster BL805E

Preview: LawnMaster NPTBL31AB

LawnMaster NPTBL31AB

Preview: LawnMaster CLBL4016A

LawnMaster CLBL4016A