17
ASSEMBLY
Fig. 6
Notches
Rods
INSTALLING/REMOVING THE GRASS COLLECTION BAG
NOTE: The safety ap is spring operated. Ensure you have a rm grip when opening and closing to avoid
personal injury.
NOTE: When using the grass collection bag, do not install the mulching plug. The mulching plug MUST be
removed prior to installing grass collection bag.
Installing the grass collection bag:
1. Lift the rear safety ap and hold it in position (Fig. 6).
2. Lift the grass collection bag by its handle, and align the rods of grass collection bag with the
notches under rear safety ap (Fig. 6).
3. Release the rear safety ap.
4. Make sure both rods are rmly seated on the notches and the safety ap rests rmly against the top
of the grass collection bag.
Removing the grass collection bag:
1. Lift the rear safety ap and hold it in position.
2. Lift the grass collection bag by its handle, and unhook the grass collection bag from the mower.
3. Release the rear safety ap.
NOTE: Under normal usage, bag material is subject to wear. To reduce the risk of injury, frequently
inspect the collection bag and replace if there are any signs of wear or deterioration.
Mulching plug must be removed
prior to installing grass collection bag
To Next Page
Loading...
