LawnMaster CLMF4815E - ATTACHING AND REMOVING MULCHING PLUG

19
ATTACHING/REMOVING THE MULCHING PLUG
Do not at any time make any adjustment to the lawn mower without rst stopping the motor and removing the
safety key. Do not attach the grass collection bag and the mulching plug at the same time.
NOTE: The mulching plug MUST be removed if grass collection bag is used during mowing operation. The
mulching plug prevents grass from being collected by blocking the collection chute. This allows the grass
clippings to be deposited back on the lawn during cutting.
1. Lift the safety ap and detach the grass collection bag.
2. Lift the safety ap and hold it in position. Insert the mulching plug into the rear discharge chute (Fig.
8). Ensure the locking button snaps into place, as picture shown (Fig. 9).
3. Press the locking button to release and remove the mulching plug (Fig. 10).
WARNING
ASSEMBLY
Fig. 9
Fig. 10
Fig. 8