16
ASSEMBLY
4. There are three possible height positions. Choose the one most suitable to the operator’s height.
5. Secure the control cable against the handle frame with the supplied cable clips (Fig. 3).
Cable Clip
Control Cable
Fig. 3
ASSEMBLING THE SIDE DISCHARGE CHUTE
Do not at any time make any adjustment to the lawn mower without rst stopping the motor and removing the
safety key.
The mower is designed to be able to disperse the clippings back to the lawn when the side discharge chute is
tted. Lift the mulching door and insert the side discharge chute by mounting the support hook onto the metal
spring frame. Release the door back down during operation (Fig. 4). This feature is optional and does not
need to be tted at all times.
WARNING
Fig. 4
To Next Page
Loading...
