17
ASSEMBLY
ADJUSTING THE CUTTING HEIGHT
Do not at any time make any adjustment to the lawn mower without rst stopping the motor and removing the
safety key. Keep your feet away from the mower deck when adjusting its height.
When shipped, the rear wheels on the mower are set to a low-cutting position. Before using the mower for the
rst time, adjust the cutting position to the height best suited for your lawn. The mower can be set to 6 cutting
heights between 1.4" (35 mm) and 3.4" (85 mm). Choose the proper cutting height according to the types and
conditions of the grass.
WARNING
To set the cutting height:
1. To raise the cutting height, grasp the cutting height adjustment lever and move it toward the back of the
mower (Fig. 5).
2. To lower the cutting height, grasp the cutting height adjustment lever and move it toward the front of the
mower (Fig. 5).
Fig. 5
LOW
HIGH
To Next Page
Loading...
