EasyManua.ls Logo

LawnMaster MEB1016M R - Page 16

LawnMaster MEB1016M R
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
OPERATION
MOWING ON A SLOPE (See Fig. 15)
■ Slopes are a major factor related to slip and fall accidents that can result in severe injury. Mowing
on slopes requires extra caution. If yo u feel uneasy on a slope, do not mow it. For yo ur safety, do
not attempt to mow slopes greater than 15 degrees.
■ Mow across the face of slopes, not up and down. Exercise extreme caution when changing direction
on slopes.
■ Watch for holes, ruts, rocs, hidden objects, or bumps which can cause you to slip or trip.
Tall grass can hide obstacles. Remove all obj ects such as rocks, tree limbs, etc., which could be
tripped over or thrown by the blade.
■ Always be sure of your footing. A slip and fall can cause serious personal injury.
If yo u feel yo u are losing yo ur balance, release the bale switch immediately.
■ Do not mow near drop-offs, ditches, or embanments; you could lose your footing or balance.
Figs. 15
MOWING TIPS
■ Mae sure the lawn is clear of stones, stics, wires, and other obj ects that could damage the lawn
mower blades or motor. Such obj ects could be accidentally thrown by the mower in any direction
and cause serious personal inj ury to the operator and others.
■ To reduce the lielihood of disconnecting the lawn mower from the extension cord, be sure to use
the cord retainer provided.
■ For a healthy lawn, always cut off one-third or less of the total length of the grass.
■ When cutting heavy grass, reduce waling speed to allow for more effective cutting and a proper
discharge of the clippings.
■ Do not cut wet grass. It will stic to the underside of the deck and prevent proper mulching of grass
clippings.
■ New or thic grass may require a narrower cut.
■ Clean the underside of the mower dec after each use to remove grass clippings, leaves, dirt, and
any other accumulated debris.

Related product manuals