LawnMaster MEB1016M R - Emptying the Grass Catcher; On;Off Operation

EMPTYING THE GRASS CATCHER (See Fig. 16)
■ Lift the grass catcher by its handle and lift to remove from mower.
■ Empty grass clippings.
■ Lift the rear discharge door and reinstall the grass catcher as described earlier in this manual.
Figs. 16
Make a loop at the end of the cable and hang the loop onto the strain relief on the cross bar.
Connect the mower to y our power supply socket.
Before switching on, ensure that the mower is not in contact with any foreign obj ects.
To Switch on, press the safety lock-off button  on the handle, then activate either of the start/stop
switch levers . Release the lock-off button .
To Switch off, release the start/stop switch lever .
ON/OFF OPERATION (See Figs. 17-18)
17
OPERATION
Figs. 17 Figs. 18