25
A ashing red LED light on the charger indicates that the battery temperature is not within the
charging temperature range of 4°C - 40°C. As soon as the permitted temperature is reached, the
battery charger will automatically switch to charging.
If the temperature range is correct and ashing red LED light continues, then remove and reinstall
the battery pack. If the LED status repeats a second time, try to charge another identical battery.
If the battery charges normally, dispose of the defective battery pack (see Recycling and Disposal
section).
If the ashing red light continues after installing the second battery (ensure the battery temperature
is normal), the charger may be defective. Replace with a new one.
After continuous or repeated charging cycles without interruption, the charger may warm up. This
is normal and does not indicate a technical defect of the battery charger.
OPERATION
To Next Page
Loading...
