5
Step 5
Position the back support plate over the seat plate (D),
and attach the back cushion(G) to the seat cushion (F)
with four 1-1/4" screws (K).
*Note: Do NOT tighten the screws completely.
Step 6
Insert four 2-3/4" screws with spring washers (L) into
arm holes attaching arms (E) (with front of arms facing
the front of seat cushion) to sides of seat cushion (F)
and back cushion (G).
*Note: Tighten all the screws completely.
G
G
F
F
E
E
K
N
N
L
L
D
To Next Page
Loading...
