LB-Link BL-WR3000 User Manual

2
Internet Paremeters Configuration
This page will then display
How to select a connection type?
User name and password
A static IP address, subnet mask,
gateway and DNS server Static IP address
The Internet parameters provided by ISP
when users apply for Internet access
No parameters, don't use any router
and don't do any setting
1.Make sure the cable is securely plugged
2.If the connection type your ISP provided is
PPTP,L2TP,you must go to “Network-WAN”
into
Configuration for Dynamic
When you choose the Dynamic IP no change required. Click “Next” to go on the next setting.
Configuration for Static Mode
This page will then display
Network Wireless Firewall Virtual Server QOSQuick Setup
Quick Setup
Qucik Setup
DHCP (Auto Config)
Static Mode (fixed IP)
PPPOE (ADSL)
Back
Back
Cancel
Cancel
Apply
ApplyNext
Select a connection type
Click Next
Note:
to configure your connection type manually.
the WAN port before detection.
Connection
type
Static Mode
Dynamic
PPPoE
A
B
Network Wireless Firewall Virtual Server QOSQuick Setup
Quick Setup
Qucik Setup
IP address
Subnet Mask
Gateway
Primary DNS Server
Secondary DNS Server
Back
Back
Cancel
Cancel
Apply
ApplyNext
(Optional)
Enter the IP address,subnet Mask,
Gateway,DNS provided by your ISP
Manually.
Click Next
Configuration for PPPOE
This page will then display
C
Network Wireless Firewall Virtual Server QOSQuick Setup
Quick Setup
Qucik Setup
Back
Back
Cancel
Cancel
Apply
ApplyNext
Access Account
Password
Enter the Access Account and
Password provided by your ISP.
Click Next
4

LB-Link BL-WR3000 Specifications

General

Brand	LB-Link
Model	BL-WR3000
Category	Wireless Router
Language	English